Table of Contents
Advertisement
Quick Links
7E8 SATA Product Manual
Standard
512N models
ST6000NM002A
ST4000NM000A
ST3000NM000A
ST2000NM000A
ST1000NM000A
SED-FIPS 140-2
512N models
ST4000NM013A
ST3000NM004A
100846380, Rev. C
May 2019
Self-Encryption
512N models
ST4000NM006A
ST3000NM002A
ST2000NM006A
ST1000NM002A
Instant Secure Erase
512N models
ST4000NM016A
ST2000NM012A
ST1000NM004A
Advertisement
Table of Contents
Related Manuals for Seagate Exos 512N
Summary of Contents for Seagate Exos 512N
- Page 1 7E8 SATA Product Manual Standard Self-Encryption 512N models 512N models ST6000NM002A ST4000NM006A ST4000NM000A ST3000NM002A ST3000NM000A ST2000NM006A ST2000NM000A ST1000NM002A ST1000NM000A Instant Secure Erase 512N models SED-FIPS 140-2 512N models ST4000NM016A ST4000NM013A ST2000NM012A ST3000NM004A ST1000NM004A 100846380, Rev. C May 2019...
- Page 2 Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. PowerChoice and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments.
-
Page 3: Table Of Contents
Seagate® Technology Support Services ........ - Page 4 S.M.A.R.T. commands............. . 39 Seagate Exos 7E8 SATA Product Manual, Rev. C...
-
Page 5: Seagate® Technology Support Services
For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/recover/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate Exos 7E8 SATA Product Manual, Rev. C... -
Page 6: Introduction
• Tarnish-resistant components to help protect drive from environmental elements, increasing field reliability. • Worldwide Name (WWN) capability uniquely identifies the drive. Seagate recommends validating the configuration with the selected HBA/ Note RAID controller manufacturer to ensure use of full capacity is supported. -
Page 7: About The Serial Ata Interface
Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. The specification can be downloaded from www.serialata.org. Seagate Exos 7E8 SATA Product Manual, Rev. C... -
Page 8: Drive Specifications
Operating temperature (Drive case max °C) Temperature gradient 20°C (operating) (°C per hour max) 30°C (non-operating) 5% to 95% (operating) Relative humidity 5% to 95% (non-operating) Relative humidity gradient 30% per hour max Seagate Exos 7E8 SATA Product Manual, Rev. C... - Page 9 *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate Exos 7E8 SATA Product Manual, Rev. C...
-
Page 10: Formatted Capacity
Sustained data transfer rate (MiB/s max) I/O data-transfer rate (MB/s max) 600 (Ultra DMA mode 5) Start/stop times Power-on to Ready (sec) (typ/max) 22/30 Standby to Ready (sec) (typ/max) 22/30 Ready to spindle stop (sec) (max) Seagate Exos 7E8 SATA Product Manual, Rev. C... -
Page 11: Power Specifications
Maximum DC 0.757 0.478 9.52 Maximum DC (Peak) 0.996 0.813 Power Governor Operating current (sequential write 64K16Q) Typical DC 0.611 0.470 8.70 Maximum DC 0.616 0.476 8.79 Maximum DC (Peak) 0.795 1.824 Seagate Exos 7E8 SATA Product Manual, Rev. C... - Page 12 0.552 0.388 7.42 Maximum DC (Peak) 0.719 0.638 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate Exos 7E8 SATA Product Manual, Rev. C...
- Page 13 0.596 0.307 6.66 Maximum DC (Peak) 0.741 0.539 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate Exos 7E8 SATA Product Manual, Rev. C...
- Page 14 2.5.1.1 Typical current profiles Figure 1. 6TB Typical 5V and 12V startup and operation current profile Figure 2. 4TB Typical 5V and 12V startup and operation current profile Seagate Exos 7E8 SATA Product Manual, Rev. C...
-
Page 15: Conducted Noise
• Using 5V power, the drive is expected to operate with a maximum of 100mV peak-to-peak square-wave injected noise at up to 10MHz. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. Note 2.5.3 Voltage tolerance Voltage tolerance (including noise): 5V +10/ -5% 12V ± 10% Seagate Exos 7E8 SATA Product Manual, Rev. C... -
Page 16: Extended Power Conditions - Powerchoice
• Saved enabled state, and timer value • Current enabled state, and timer value S.M.A.R.T. Read Data Reports • Attribute 192 - Emergency Retract Count • Attribute 193 - Load/Unload Cycle Count Seagate Exos 7E8 SATA Product Manual, Rev. C... - Page 17 Disable EPC Feature Set PowerChoice Supported Extended Power Condition Identifiers Power Condition Identifiers Power Condition Name Standby_z 01 - 80 Reserved Idle_a Idle_b Idle_c 84 - FE Reserved All EPC Power Conditions Seagate Exos 7E8 SATA Product Manual, Rev. C...
-
Page 18: Environmental Limits
Non-operating –40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. 2.6.2 Humidity The values below assume that no condensation on the drive occurs. -
Page 19: Acoustics
Test for Prominent Discrete Tones (PDTs) Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 20: Electromagnetic Immunity
From this page, click on the “Is my Drive under Warranty” link. The following are required to be provided: the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for the drive. Preventive maintenance None required. Seagate Exos 7E8 SATA Product Manual, Rev. C... -
Page 21: Agency And Safety Certifications
Seagate drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with all relevant regulatory requirements and standards for the drives, Seagate cannot guarantee that all system-level products into which the drives are installed comply with all regulatory requirements and standards applicable to the system-level products. The drive is designed for operation inside a properly designed system (e.g., enclosure designed for the drive), with properly shielded I/O cable (if... -
Page 22: Morocco Commodity Mark
2.11.7 Morocco Commodity Mark To satisfy our OEM customers, Seagate has added the Moroccan Commodity Mark to the drives provided to the OEM for the sale of Customer Kits produced by our OEM customers that are intended to be incorporated into the OEM's finished system-level product by an end user. -
Page 23: Environmental Protection
2.12.1.1 Restriction of Hazardous Substances in Electrical and Electronic Equipment Seagate drives are designed to be compliant with the European Union RoHS "Recast" Directive 2011/65/EU (RoHS 2) as amended by Directive (EU) 2015/863. The RoHS2 restricts the use of certain hazardous substances such as Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ether (PBDE), BisBis(2-Ethylhexyl) phthalate (DEHP), Benzyl butyl phthalate (BBP), Dibutyl phthalate (DBP), and Diisobutyl phthalate (DIBP) in electrical and electronic equipment (EEE). -
Page 24: Taiwan Requirements - Taiwan Rohs
The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives. Seagate recommends that data centers be kept clean by monitoring and controlling the dust and gaseous contamination. Gaseous contamination should be within ANSI/ISA S71.04-2013 G2 classification levels (as measured on copper and silver coupons), and dust contamination to ISO 14644-1 Class 8 standards, and MTBF rated conditions as defined in the Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF) section. -
Page 25: Reference Documents
Seagate’s option and at no charge to the customer, if returned by customer at customer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. -
Page 26: Configuring And Mounting The Drive
Figure 4. Attaching SATA cabling Each cable is keyed to ensure correct orientation. Seagate Exos 7E8 SATA drives support latching SATA connectors. Drive mounting Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. -
Page 27: Mechanical Specifications
C L OF DRIVE 2.000 .138±.015 1.028 MAX [26.10MM] Figure 5. Mounting configuration dimensions (6TB models) The image is for mechanical dimension reference only and may not represent the actual drive. Note Seagate Exos 7E8 SATA Product Manual, Rev. C... - Page 28 C L OF DRIVE .138±.015 2.000 1.028 MAX 26.10 MM Figure 6. Mounting configuration dimensions (4TB - 1TB models) The image is for mechanical dimension reference only and may not represent the actual drive. Note Seagate Exos 7E8 SATA Product Manual, Rev. C...
-
Page 29: About Self-Encrypting Drives
The Trusted Computing Group (TCG) is an organization sponsored and operated by companies in the computer, storage and digital communications industry. Seagate’s SED models comply with the standards published by the TCG. To use the security features in the drive, the host must be capable of constructing and issuing the following two ATA commands: •... -
Page 30: Random Number Generator (Rng)
In addition to providing a locking mechanism to prevent unwanted firmware download attempts, the drive also only accepts download files which have been cryptographically signed by the appropriate Seagate Design Center. Three conditions must be met before the drive will allow the download operation: The download must be an SED file. -
Page 31: Power Requirements
The drive shall not support the OVERWRITE EXT and BLOCK ERASE EXT sub-commands. Support of the SANITIZE FREEZE LOCK EXT command shall be determined on a customer-specific basis. OEM drives shall support the command. Seagate Exos 7E8 SATA Product Manual, Rev. C... -
Page 32: About Fips
Figure 7. Example of FIPS tamper evidence labels. Image is for reference only, may not represent actual drive Note Seagate Exos 7E8 SATA Product Manual, Rev. C... -
Page 33: Serial Ata (Sata) Interface
For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. Hot-Plug compatibility Seagate Exos 7E8 SATA drives incorporate connectors which enable users to hot plug these drives in accordance with the Serial ATA Revision 3.2 specification. This specification can be downloaded from www.serialata.org. -
Page 34: Supported Ata Commands
/ 0014 Sanitize Device - Freeze Lock Ext / 0020 Sanitize Device - Status Ext / 0000 Security Disable Password Security Erase Prepare Security Erase Unit Security Freeze Security Set Password Security Unlock Seagate Exos 7E8 SATA Product Manual, Rev. C... - Page 35 Write DMA FUA Extended Write FPDMA Queued Write Log DMA Ext Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Without Retries Write Sectors Extended Write Uncorrectable Seagate Exos 7E8 SATA Product Manual, Rev. C...
-
Page 36: Identify Device Command
Recommended multiword DMA transfer cycle time per word (120 ns) 0078 Minimum PIO cycle time without IORDY flow control (240 ns) 0078 Minimum PIO cycle time with IORDY flow control (120 ns) 0078 Additional supported 00008 70–74 ATA-reserved 0000 Seagate Exos 7E8 SATA Product Manual, Rev. C... - Page 37 Seagate-reserved xxxx 160–205 ATA-reserved 0000 SCT Command Transport command set. If bit 0 is set to one, then the device supports SCT Command Transport. xxBD Bits 7:2 indicate individual SCT feature support. Seagate Exos 7E8 SATA Product Manual, Rev. C...
- Page 38 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate Exos 7E8 SATA Product Manual, Rev. C...
-
Page 39: Set Features Command
Disable use of SATA features Enable read look-ahead (read cache) feature (default). Report full capacity available At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Note Seagate Exos 7E8 SATA Product Manual, Rev. C... -
Page 40: Commands
S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status If an appropriate code is not written to the Features Register, the Note command is aborted and 0x 04 (abort) is written to the Error register. Seagate Exos 7E8 SATA Product Manual, Rev. C... - Page 41 Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 Publication Number: 100846380, Rev. C May 2019...