Power Switch - Peavey Ecoustic E208 Operating Manual

Front Panel
15 16

POWER SWITCH

15
On/Off switch. The red pilot light illuminates when the unit is turned on.
IEC MAINS CONNECTOR
16
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the
intended operating voltage is included in the carton. The mains cord should be connected to the amplifier
before connecting to a suitable AC outlet.
U.S. Domestic AC Mains Cord
The mains cord supplied with the unit is a heavy-duty, three conductor type with a conventional 120VAC plug
with ground pin. If the outlet used does not have a ground pin, a suitable adapter should be used and the
third wire grounded properly. All apparatus with class 1 construction shall be connected to a mains socket
with a protective earthing connection.
Never break off the grounding pin on any equipment. It is provided for your safety. The use of extension
cords should be avoided but, if necessary, always use a three wire type. Always use a qualified electrician to
install any electrical equipment. To prevent the risk of shock or fire hazard, always be sure the amplifier and
all associated equipment is properly grounded.
NOTE: For UK Only
If the colors of the wires in the mains lead of this unit do not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow must
be connected to the terminal that is marked by the letter E, the earth symbol, colored green or green and
yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with the letter N or
the color black. (3) The wire that is colored brown must be connected to the terminal that is marked with the
letter L or the color red.
9