Advertisement
5
4
3
2
1
6
Figure 1
1. Rear edge of the hood
2. Bottom edge of the cover
3. Hinged cover
4. Using the cover as a template, mark the outline of the
holes on the rear hood (Figure 2).
5. Remove the cover from the machine.
6. Center-punch the hood at the marked locations created
in step 4.
7. Drill 7 holes into the rear hood with a 9/32 inch drill
bit at the center-punch marks (Figure 2).
G021638
4. Cover
5. Holes in cover
6. Align the cover to the edge
of the hood
1
1. Mark and drill 9/32 inch
holes here
8. Remove the drop cloth under the rear hood and
components.
2
1
g021622
Figure 2
2. Use the cover as a
template
2
Advertisement
