water saver FlushMinder RF Wireless Dual Flush Kit Instructions

QUICK START FlushMinder RF Wireless Dual Flush Kit Instructions
This general instruction sheet covers the basic installation procedure for this kit. Since toilet configurations vary
widely, your particular installation may require additional steps and/or hardware. For more information, please
visit our website at https://water-saver.org or email your questions to support
Thank You for choosing Water Saver Products ! ! !
O
VERVIEW
This electronic dual-flush toilet conversion system fits most standard Flush Handle toilets with a "flapper valve" and is activated by a
WIRELESS REMOTE. Upon toilet use, a simple press of the button on the Remote Control activates a Flush Motor inside the tank which
lifts the flapper valve for either a Half-Flush (#1) or Full-Flush (#2) as desired, depending on how long the button is pressed. The Remote
Control has an average range of 15 feet and is linked to its Receiver to prevent interference from other wireless devices, allowing for
various options in the mounting location. The Flush Motor and Receiver/Battery Box installations are quick and easy with NO TOOLS, NO
TANK REMOVAL or plumbing skills required. Both the Flush Motor and Receiver/Battery Box are moisture sealed and run on standard
batteries (included) for up to 6 months or 5,000 worry-free flushes. Saves water and improves sanitation - perfect for children, disabled
adults, the elderly, public toilets or any high-use bathroom area where flushing delinquency is a problem.
P
REPARATION
Before attempting installation, PLEASE READ these Quick Start Instructions thoroughly and familiarize yourself with your specific toilet
components down inside the tank. Ensure that the Receiver/Battery Box can be clipped to the inside edge of the toilet tank without
obstructing the other components. Similarly, check that the Flush Motor will fit onto the filler tube down inside the toilet tank and
directly above the flapper valve without interference. The single large button on the Remote Control can be hand or foot activated,
so choose an appropriate location for easy access. Also note that the Remote Control uses radio signals and will transmit through
walls and doors, but the range may be reduced, so some experimentation may be required to find the optimal mounting location.
C
OMPONENTS
(Objects not to relative scale for clarity)
RECEIVER
BATTERY
BOX
FLUSH HANDLE
(Remains Functional)
FLUSH HANDLE
LEVER ARM
FLUSH MOTOR
BEAD CHAIN
®
FLUSH HANDLE
PULL CHAIN
@water-saver.org.
REMOTE
CONTROL
(Objects not to relative scale for clarity)
FLUSH
MOTOR
MOTOR MOUNTS
CR2032 LITHIUM
I
NSTALLATION (
"Home of the FlushSaver DIY Kits"
©
◊◊◊ KFM-RFA-QS Rev B
A
CCESSORIES
REMOTE
CONTROL
LABELS
BEAD CHAIN (6 inches)
CABLE TIES (2 - OPTIONAL)
MOUNT COLLARS
(2 SIZES - OPTIONAL)
(2 INCLUDED)
SCREWDRIVER
AA ALKALINE (6)
)
over
WSP 2023 ◊◊◊