Advertisement
Step 1: Tag the MHT, "Out of Service."
Step 2: Complete an every use and a monthly inspection. If deformity, corrosion, rusting, or excessive wear of
structural members is present, DO NOT use the MHT. Contact Vestil for instructions.
Step 3: Remove any dirt or other matter from the forks and other surfaces.
Step 4: Perform all other necessary adjustments and/or repairs, but DO NOT modify the truck.
The reader should understand the significant difference between necessary adjustments and
repairs, and modifications.
An adjustment is a simple correction that restores the MHT to normal operating condition, such as tightening loose
fasteners, or removing dirt or other debris from the surface; a repair refers to replacing worn parts with new or
replacement parts.
DO NOT use the tugger if adjustments and/or repairs are incomplete! Return it to service ONLY after finishing all
necessary repairs and adjustments.
A modification is a change that alters the MHT from normal operating condition, like bending the structural members
or removing a part or several parts. NEVER modify the unit without the express, written approval of Vestil.
Modifications may render the product unsafe to use.
Step 5: Make a dated record of the repairs, adjustments and/or replacements made.
Copyright 2021 Vestil Manufacturing Corp.
E-TUG-HD, Manual
Page 13 of 15
Advertisement
