Associations - QUBINO ZMNHCD6 User Manual

Table of Contents

Advertisement

12. Associations

Use associations for direct communication between the Flush Shutter and other devices within
your Z-Wave network without the need of your primary gateway (hub).
Association Groups:
Root device:
• Group 1: Lifeline group (reserved for communication with the primary gateway (hub)), 1
node allowed.
• Group 2: Basic on/off (Triggered at change of input I1) up to 16 nodes.
When switch wired to input I1 is pressed Flush Shutter will send Basic set ON command
to associated device and this device will turn ON, when it is released Flush shutter sends
Basic set OFF command to associated device and this device will turn OFF.
• Group 3: Basic on/off (Triggered at change of input I2) up to 16 nodes.
When switch wired to input I2 is pressed Flush Shutter will send Basic set ON command
to associated device and this device will turn ON, when it is released Flush shutter sends
Basic set OFF command to associated device and this device will turn OFF.
• Group 4: Basic on/off (Triggered at sensing moving direction of roller: up= FF, down = 00)
up to 16 nodes.
When blinds are moving up, Flush Shutter will send Basic set ON command to associated
device and associated device will turn ON. When blinds are moving down, Flush Shutter
will send Basic set OFF command to associated device and the device will turn OFF.
• Group 5: Basic on/off (Triggered at reaching roller position: bottom=FF, top=0) up to 16
nodes.
When blinds reach upper position Flush Shutter will send Basic set OFF command to
associated device and the device will turn OFF. When blinds reach down position Flush
Shutter will send Basic set ON command to associated device and the device will turn ON.
• Group 6: Basic on/off (triggered at reaching roller position: bottom=FF, not bottom=0) up
to 16 nodes
When blinds reach down position, Flush Shutter will send Basic set ON command and the
device will turn ON. When blinds are in any position which is not down (0%) Flush Shutter
will send Basic set OFF to associated device and the device will turn OFF.
37
EN.

Advertisement

Table of Contents
loading

Table of Contents