Stanley SXLS37951E Instruction Manual

Technical Data

Supply Voltage: 220-240 V~ 50 Hz
Bulb Type:
2 x Non-replaceable 20W LED, 2800lms
4000K
The light source contained in this luminaire
shall only be replaced by the manufacturer or
his service agent or a similar qualified person
Conformity with all relevant EC and UK
&
Directive requirements.
Class I product, must be connected to earth.
Totally protected against dust. Protected
IP65
against low pressure jets of water from all
directions. Limited ingress permitted.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling
advice.
2-YEAR LIMITED WARRANTY
The warranty of this product is covered by Cascade Holdings Ltd.
© Stanley Black & Decker, Inc.
STANLEY and the STANLEY Logo are trademarks of Stanley Black & Decker, Inc or one of its afiliates,
and are used under license.
Products are manufactured by:
Cascade Holdings Ltd.
Gorse Mill, Gorse St
Oldham, OL9 9RJ U.K.
www.stanleytools.co.uk
(See rating / box info)
Eu Authorised Representative:
Authorised Rep Compliance
Ground Floor
71 Lower Baggot Street
Dublin
Ireland
D02 P593
SXLS37951E - 2 x 20W
Twin LED Worklight
Instruction Manual
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
The thick and thin horizontal line field and the engineering plan packaging design are trademarks
of Stanley Tools.
CUSTOMER SUPPORT:
For customer service please visit the Online Customer Service Centre at: www.2helpU.com