Stanley SXLS35525E Instruction Manual

Technical Data
Supply Voltage: 220-240 V ~ 50/60 Hz
Non-replaceable 20W LED
Bulb Type:
(See rating / box info)
The light source contained in this luminaire
shall only be replaced by the manufacturer or
his service agent or a similar qualified person.
Conformity with all relevant UK & EC Directive
requirements.
Class I product, must be connected to earth.
Totally protected against dust.
IP65
Protected against low pressure jets of water
from all directions. Limited ingress permitted.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling
advice.
2-YEAR LIMITED WARRANTY
The warranty of this product is covered by Cascade Holdings Ltd.
© Stanley Black & Decker, Inc.
STANLEY and the STANLEY Logo are trademarks of Stanley Black & Decker, Inc or one of its afiliates,
and are used under license.
Products are manufactured by:
Eu Authorised Representative:
Authorised Rep Compliance
Cascade Holdings Ltd.
Ground Floor
Gorse Mill, Gorse St
71 Lower Baggot Street
Oldham, OL9 9RJ U.K.
Dublin
Ireland
www.stanleytools.co.uk
D02 P593
SXLS35525E - 20W
20W LED Worklight
Instruction Manual
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
The thick and thin horizontal line field and the engineering plan packaging design are trademarks
of Stanley Tools.
CUSTOMER SUPPORT:
For customer service please visit the Online Customer Service Centre at: www.2helpU.com