Stanley SXLS31326E Instruction Manual

Led worklight

Enlarged version

Technical Data

Supply Voltage:

220-240 V~ 50 Hz

Bulb Type:

Non-replaceable 35W LED

Conformity with all relevant EC Directive

requirements.

Class I product, must be connected to earth.

Protects against solid objects over 1mm and

IP44

sprays from all directions.

Limited ingress permitted.

Waste electrical products should not be

disposed of with household waste. Please

recycle where facilities exist. Check with your

Local Authority or local store for recycling

advice.

SXLS31326E

LED Worklight

Instruction Manual

Table of Contents

Do you have a question about the SXLS31326E and is the answer not in the manual?

Page 1: Technical Data
Technical Data Supply Voltage: 220-240 V~ 50 Hz Bulb Type: Non-replaceable 35W LED SXLS31326E LED Worklight Conformity with all relevant EC Directive requirements. Instruction Manual Class I product, must be connected to earth. Protects against solid objects over 1mm and IP44 sprays from all directions.
Page 2 READ ALL INSTRUCTIONS Installation Instructions Safety These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference. Always organise cables and extension leads so that they will not be a trip hazard If the external flexible cable or cord of this Luminaire is damaged, it must only be replaced by a qualified electrician to avoid any electrical hazards.