Advertisement
OPERATION
Connecting to Power
1.
Connect the power adapter to the power input on the frame and then plug it into
an electrical outlet.
2.
Press and hold the power button on the rear of the frame until the frame turns on.
Initial Setup
When using this digital photo frame for the first time, you will need to set up the following:
1.
Select your desired language.
2.
Connect the frame to your Wi-Fi network.
3.
Set the date and time.
4.
You may be asked to update the frame to the latest firmware version. Note: if
prompted, it is highly recommended to update the firmware before continuing.
5.
Enter your name and the location where you have placed the frame e.g. "John
Doe" and "Living room", "Kitchen" or "Office".
Download the Frameo app
• To send photos to your frame, you will need to download the Frameo app on your
phone.
• Find the Frameo app by scanning the code below or by searching for "Frameo" on the
Google Play Store (android) or the App Store (iOS).
Advertisement
