Advertisement
Safety Information
Important Safety Precautions:
Keep away from water, moisture and dusty areas.
Working temperature 0-40℃. Never store in a hot or very
cold place.
Be careful not to drop or knock the photo frame.
Never try to open the case yourself, always seek technical
support.
Connect the AC adaptor to both the DC IN jack and to the
power outlet.
Only use accessories approved by the manufacturer.
When left unused for a long period of time, the
unit should be unplugged from the household AC outlet.
Warning:
To reduce the risk of fire or electric shock, do not expose to rain,
moisture, dripping or splashing.
Package Contents:
DPF
Adaptor
Note: Make sure the DPF stand is inserted fully before using,
otherwise you will not be able to tighten the stand.
Quick Start:
1.
Insert the jack of the DC adaptor into the digital photo frame,
then plug the DC adaptor into a standard power outlet.
2.
Turn on the power to switch on the digital photo frame.
3
Press ON/OFF on the unit to turn on and off digital photo
frame.
Operation Guide:
Picture display screen
1
Choose the "PICTURE" icon and select the memory card you
want to view. Press ENTER to go to the picture preview
mode.
2
Press right/left on the unit to select the picture you want to view.
In the picture preview mode, press the MENU button to edit
these pictures.
(mark picture) (delete) (picture info)
Change the photo display mode in the SETTING menu,
choose, "Slideshow mode", Then press ENTER. There are
"Single mode", "Splitscreen" and "Multishow" available.
1/2
Splitscreen
Multishow
Note: If you want to stop the slideshow and keep the picture
on the screen, you can press ENTER, then continue
pressing ENTER to slide show.
When playing a picture, you can press ENTER to pause the
picture, then, press MENU to adjust or set up the picture.
(Right rotate) (left rotate) (delete) (setting) (photo adjustment)
3, Setting
Choose SETTING to set up your photo frame.
4, OSD MENU FUNCTIONS
Advertisement
