Address 77 - Serial; Address 78 - Config - GE DPS 5000 Series User Manual

Bit 7
Bit 6
Bit 31–0 MIN_ADC_TEMP [31..0]: Read only – if the current value of the ADC_TEMP
register (address 4) is less than this value, VALID[1] (bit 2) of the STATUS
register (address 0) will be cleared.
0xn..n Number type unsigned word
3.3.21 Address 77 – SERIAL
Bit 31
Bit 30
Bit 23
Bit 22
Bit 15 Bit 14
Bit 7 Bit 6
Bit 31–0 SERIAL [31..0]: Read only – the sensor manufacturer's serial number.
0xn..n Number type unsigned word
3.3.22 Address 78 – CONFIG
Bit 31 Bit 30
Reserved Reserved
R-0 R-0
Bit 23 Bit 22
Reserved Reserved
R-0 R-0
Bit 15
Bit 14
ASYNC STANDBY
R-X R-X
Bit 7
Bit 6
Bit 31–16 Reserved, read only
Bit 15 ASYNC: Read only – optional asynchronous serial communication capability.
0b0 Available
0b1 Not available
Bit 14 STANDBY: Read only – low power stand-by mode capability.
0b0 Available
0b1 Not available
Bit 13 TRIGGER: Read only – external wake-up trigger capability.
0b0 Not available
0b1 Available
Bit 12–8 Reserved, read only
Bit 7–0 TYPE [7..0]: Read only – ASCII character defining the sensor type.
K0582 Revision B
Bit 5 Bit 4
MIN _ADC_TEMP [7..0]
R-X
Bit 29 Bit 28 Bit 27
SERIAL [31..24]
R-X
Bit 21 Bit 20 Bit 19
SERIAL [23..16]
R-X
Bit 13 Bit 12 Bit 11
SERIAL [15..8]
R-X
Bit 5 Bit 4
SERIAL [7..0]
R-X
Bit 29 Bit 28 Bit 27
Reserved Reserved Reserved
R-0 R-0
Bit 21 Bit 20 Bit 19
Reserved Reserved Reserved
R-0 R-0
Bit 13 Bit 12 Bit 11
TRIGGER Reserved Reserved
R-X R-0
Bit 5 Bit 4
TYPE[7..0]
R-X
May 2015
Bit 3 Bit 2 Bit 1
Bit 26 Bit 25
Bit 18 Bit 17
Bit 10 Bit 9
Bit 3 Bit 2 Bit 1
Bit 26 Bit 25
Reserved Reserved
R-0 R-0 R-0
Bit 18 Bit 17
Reserved Reserved
R-0 R-0 R-0
Bit 10 Bit 9
Reserved Reserved
R-0 R-0 R-0
Bit 3 Bit 2 Bit 1
Bit 0
Bit 24
Bit 16
Bit 8
Bit 0
Bit 24
Reserved
R-0
Bit 16
Reserved
R-0
Bit 8
Reserved
R-0
Bit 0
15