Key Insertion - Digilock numeris versa mini Product Manual

Key Insertion

Numeris logo must face towards the ` Button.
Setup
Locks are shipped with factory default settings (only operates by touching `). Each lock must be set up to operate with a Programming
Key and Manager Credentials.
1
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn on.
3
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
2
Product Guide
Touch RFID
2
While the LED is on, insert one Manager Key or present one RFID Credential
at a time.
A two-tone beep will be heard for each Manager Credential programmed.
4
Repeat above steps for each lock or follow instructions to Express Register
Manager Credentials to set up all locks.
Shared & Assigned Use Functionality
or