Control Instructions; Description Of Remote Controller - Carbest CoolSky 2600 W User Instruction

EN

3. CONTROL INSTRUCTIONS

3. 1. Description of remote controller

After power-on, the compressor will be turned on in a few minutes.
Press the "MODE" button to switch various modes (Auto, Cooling, Dehumidification, Fan and Heat-
ing). 2 seconds later, the system will confirm to enter the selected working mode and an internal
buzzer sound can be heard.
cold mode
auto fan
automatic
mode
night mode
fan speed
light
electrical heat
airflow direction
ON/OFF
fan speed
no function
clock setting
lock
airflow direction
dehumidification
mode
fan mode
heat pump mode
set point
clock
lock
temperature
selection +
change mode
fan speed +
temperature selection -
sleep
timer on/timer off
no function
set temperature
unit to °C or °F
AUTO MODE
NOTE 1 : in this mode, the device will automatically set the compressor, heat pump and fan speed
entirely automatically by comparing the set temperature with the internal temperature
according to Table A.
NOTE : on automatic speed the correct ventilation is set according to the difference in temperature
2
between the set point and the ambient temperature.
28
CARBEST CoolSky| 495003/4950031/495004/4950041
Press the ON/OFF button to switch on
the device.
Press the change mode button to select
automatic mode 1 .
The temperature selection buttons are
disabled.
Press the fan speed button to select
low, medium or high speed or auto-
matic speed .
2
Press the ON/OFF button to switch off
the device. This mode stays in memory
for switching on the next time.