Panel Installation - Carbest CoolSky 2600 W User Instruction

EN
Insert the anti-freezing temperature sensing head into the fixing frame of temperature sensing head
on the evaporator as shown in the following figure:
Fixing frame of
temperature sensing
head (blue).
Terminal of anti-freezing
sensor of connecting
main board.
1. Connecting wire of display panel.
2. Room temperature sensor.
3. Outdoor ambient temperature-sensor and
outdoor coil temperature sensor.
4. Anti-freezing sensor.
5. LED strip connecting wire (not relevant for
495003, 4950031, 495004, 4950041).
Fixing frame of
temperature
sensing head.

2.5. Panel installation

• Press in the left and right buckles on the decorative panel at the same time to remove the
decorative panel, as shown in the following figure.
Left and right buckles
on the decorative
panel.
• Place the panel according to the direction indicated on the panel, pass the connecting wire of
display panel on the control box through the hole on the panel, install the panel on the fixing plate
and fix it tightly with 4 screws as shown in the following figure.
Connecting wire of
display board
Wire hole on the panel
Connecting wire of
display board
Screw (4)
26
CARBEST CoolSky| 495003/4950031/495004/4950041
Arrow direction on the panel (vehicle front
direction).