Toro Recycler 144-6377 Manual

Toro Recycler 144-6377 Manual

Advertisement

Traction Assist Handle Kit
Recycler
Model No. 144-6377

Preparing the Machine

1.
Move the machine to a level surface.
2.
Shut off the engine and wait for all moving parts to stop.
3.
Remove the handle cover

Installing the Kit

Install the traction-assist handle on the machine as
shown in
Figure
2.
1. Traction-assist handle
2. Flat washer (4)
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Lawn Mower
(Figure
1).
Figure 2
3. Lock washer (2)
4. Bolt (2)
Register at www.Toro.com.
Figure 1

Operation

Using the Traction-Assist
Handle
The traction-assist handle allows you to use your
hands to control the speed of the machine instead of
your walking speed. This is helpful for turning tight
corners, going up hills, and mowing at maximum
speed.
1.
Reach forward with your fingertips and grasp the
corners of the traction-assist handle
g346831
Original Instructions (EN)
Form No. 3444-465 Rev A

Installation Instructions

*3444-465*
Printed in the USA
All Rights Reserved
g346829
(Figure
3).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Recycler 144-6377 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toro Recycler 144-6377

  • Page 1 Figure 2 1. Traction-assist handle 3. Lock washer (2) 2. Flat washer (4) 4. Bolt (2) *3444-465* © 2021—The Toro® Company Original Instructions (EN) Register at www.Toro.com. 8111 Lyndale Avenue South Printed in the USA Bloomington, MN 55420 All Rights Reserved...
  • Page 2 g346836 Figure 3 Squeeze the 2 handles together until the machine moves at your desired ground speed. Release the traction-assist handle when you no longer need it. Important: The machine will continue to self-propel until you release the traction-assist handle and stop walking.

Table of Contents