Dometic SEASTAR POWER ASSIST PA1200-2HP Installation And User Manual page 34

Twin station, single cylinder system configuration
Procedure: Perform steps 1–3 at station number 1. Move the helm fill tube
to station number 2 and repeat steps 2 and 3 from there.
Repeat for any additional stations.
STATION NO.2
STATION NO.1
P/A UNIT
CYLINDER
Figure 4-15.
Single station, twin cylinder system configuration
Procedure: Perform steps 1–3. In steps 2–3, perform each instruction on
both cylinder 1 and cylinder 2 before proceeding to the next instruction.
P/A UNIT
CYLINDER NO.2 CYLINDER NO.1
Figure 4-16.
Twin station, twin cylinder system configuration
Procedure: Perform steps 1–3 at station number 1. In steps 2–3 perform
each instruction on both cylinder 1 and cylinder 2 before proceeding to
the next instruction.
Repeat at station number 2.
4-6
EN