Operating Procedures; Camera Control Functions; Pan/Tilt Control; Lens Control - Panasonic WV-CU161 Operating Instructions Manual

OPERATING PROCEDURES

CAMERA CONTROL FUNCTIONS

It is necessary to setup the camera before using the cam-
era control functions. For further information, refer to the
Operating Instructions for the respective combination cam-
era (See page 30). You can also set it up from Camera
Setup menu if you operate a system.

Pan/Tilt Control

The following function is available with a combination cam-
era or pan/tilt head.
Move the pan/tilt head in the desired direction using the
joystick.
The camera can be moved in eight directions.
¶
To move the pan/tilt head slowly, move the joystick while
holding down the SLOW/CAMERA FUNCTION button.
Note: The SLOW/CAMERA FUNCTION button cannot be
used in the camera or pan/tilt head which is not provid-
ed with 8-steps speed.
24
Joystick
ª
E
"

Lens Control

The following functions are available with cameras provided
with controllable lens.
1. Press the FOCUS NEAR or FOCUS FAR button to
adjust the lens focus while watching the monitor.
NEAR
FOCUS
AUTO FOCUS
If you are using a camera with an auto focus feature,
the lens focus can be automatically adjusted by press-
ing the FOCUS NEAR and FOCUS FAR buttons simul-
taneously.
2. Press the ZOOM TELE button to optically bring the
object closer, or press the ZOOM WIDE button to opti-
cally widen the scene.
WIDE
CLOSE
IRIS RESET
Focal length differs depending on the lens installed on
the camera.
3. Press the SHIFT button.
SHIFT
4. Press the ZOOM/IRIS buttons to adjust the lens focus
while watching the monitor.
If the IRIS CLOSE and IRIS OPEN buttons are pressed
for approx. 1 sec. or more simultaneously, the iris is
reset to the default.
WIDE
CLOSE
IRIS RESET
FAR
TELE
ZOOM
IRIS
OPEN
TELE
ZOOM
IRIS
OPEN