Riello K160240PB12T User Manual page 4

INTRODUCTION
Thank you for choosing our product.
Our company is specialised in the development and production of uninterruptible power supplies (UPSs).
This manual contains detailed instructions for using and installing a BATTERY BOX for a UPS.
This manual must be stored in a safe place near the BATTERY BOX and CONSULTED BEFORE
DEVICE USE for proper usage instructions as well as maximum performance from the device itself.
ENVIRONMENTAL PROTECTION
During the development of its products, the company uses extensive resources with regards to all
environmental aspects.
All our products pursue the objective defined in the environmental management system developed by the
company in compliance with standards in force.
No hazardous materials such as CFC, HCFC or asbestos are used in this product.
When evaluating packaging, the choice of material has been made favouring recyclable materials.
For correct disposal, please separate and identify the type of material of which the packaging is made in the
table below. Dispose of all material in compliance with standards in force in the country in which the product
is used.
D
ESCRIPTION
Pallet
Packaging corner
Box
Adhesive pad
Protective bag
DISPOSING OF THE PRODUCT
The BATTERY BOX contains internal material that (in case of dismiss / disposal) are considered TOXIC and
HAZARDOUS WASTE, such as electronic circuit boards and batteries. Treat these materials according to
the laws applicable referring to qualified service personnel. Their proper disposal contributes to respect the
environment and human health.
© The reproduction of any part of this manual, even in part, is prohibited unless authorised by the Manufacturer.
The manufacturer reserves the right to change the product described at any time without prior notice for improvement purposes.
- ENGLISH -
M
ATERIAL
Heat-treated pine
Stratocell/cardboard
Cardboard
Stratocell
HD Polyethylene
4