Riello K160240PB12T User Manual page 3

SAFETY
ATTENTION: THIS
UNINTERRUPTIBLE POWER SUPPLY (UPS). THE UPS SHALL HAVE THE SAME NOMINAL
VOLTAGE AS THE BATTERY (SEE THE DATA PLATE)

 Before carrying out any work on the cabinet, make sure that the battery is completely disconnected from
the UPS and other equipment
 Fully switch off the UPS before connecting the battery cabinet
 Do not switch on or install the battery cabinet if any loss of battery acid is noted.
 The battery cabinet presents a high risk of electrical shock and high short circuit current.
 Installation and maintenance operations must only be performed by qualified, trained personnel.
 Carefully follow the instructions below for installing and maintaining the battery cabinet:

Use insulated equipment.

Wear safety goggles, footwear and rubber gloves.

Observe polarities.

Remove metal objects (watches, bracelets, etc.).

Be careful not to touch the battery terminals.

If necessary, replace fuses only with same type.
 Battery replacement must be performed by qualified personnel. When disposing of replaced items, you
must deliver to the appropriate centres for recycling (batteries are classified as "toxic waste").
 Do not throw batteries in a fire as they can explode.
 Do not attempt to open the batteries as no maintenance is required. The electrolyte is harmful to the
skin and eyes and also toxic and therefore harmful if inhaled or ingested.
 Do not place liquids or other foreign bodies in the battery cabinet
 The battery cabinet must be grounded
BATTERY CABINET
- ENGLISH -
CAN ONLY BE
3
CONNECTED TO A SINGLE