KLIM Ai-1 User Manual page 20

and other straps for maximum comfort. The IMP back 1 protector is
compatible with pocket of size 25*46 for size 1, 26*48cm for size 2
and 28*50cm for size 3.
4 MINIMUM DIMENSIONS IN THE PROTECTION AREAS
Figure 1 - Full back protector
Dimensions of the minimum
protection area on the back
protector
Dimensions of Figure 1
A B C
72% 29% 44%
NOTE: All dimensions are related to the
waist-shoulder length (100%) of the
largest user.
5 Level of protection
The protection areas of this product have been tested and
certified in accordance with the standard EN1621-2:2014. The table
below indicates the values of average residual force for the two
levels of protection defined by standard.
LEVEL*
1
2
6 EXPLANATION OF THE MARKING
The CE marking indicates that the impact protector is conform to
regulatory requirements EU 2016/425.
Name of the back protector
CE : Symbol of European conformity
Pictogram indicating exclusive motorcycle use of the protection
D E F
29% 32% 25%
AVERAGE TOTAL
VALUE
≤ 18W KN
≤ 9 KN
INDIVIDUAL VALUE
≤ 24 KN
≤ 12 KN