Installing Drivers / Panaboard Software - Panasonic UB-2315C Operating Instructions Manual

Installing Drivers / Panaboard
Software
The USB and TWAIN driver and Panaboard Software
are installed in your computer by following
procedures.
Note
• Do not yet connect a USB cable to the unit.
1
Power on your computer and start Windows*
• Log on as an administrator for
or Windows XP.
1
* Microsoft® Windows® operating system
(hereafter Windows)
2
Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
• Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, execute "Menu.exe" in the
CD-ROM from "My Computer".
3
When "Welcome" window appears, click
[Next].
4
Click [Panaboard Setup].
• To install Panasonic-DMS, click [Panasonic-
DMS] (see page 25).
• To read the operating instructions in the
provided CD-ROM, the Adobe Reader or
Acrobat Reader must be installed in your
computer. It can be downloaded from the
Adobe's Web site if Internet is available.
5
1 .
Windows 2000
6
7
Computer Interfacing
Click [Install Software].
Read "END-USER LICENSE AGREEMENT"
carefully and click [Yes].
When the following window appears, check
that the unit is not connected to your computer
and click [OK].
• If the USB cable is connected to the unit,
remove it and click [OK].
23