Control Panel - OmniBlend TM788 Owner's Manual

WARNING
When using the tamper, hold the jug firm on the base with the other hand,
and avoid excessive wiggling of the jug on the base. If the jug is wiggling
on the base it starts wearing the drive socket.

CONTROL PANEL

1. On/Off Switch: Push up to turn On (|). Push down to turn Off (O).
2. Speed Switch: LO indicates low speed. Switch to HI to increase the speed. Always make sure that the
HI/LO Switch is set to LO before pushing the On/Off Switch to the On position. Do not start your
machine on HI speed.
15