Printing - Panasonic Panaboard UB-8325 Operating Instructions Manual

Using the Panasonic-DMS
Panel
Copy Button
Status Box
About Button
Close Button

Printing

To print documents from the computer to the printer, select the Print menu of the application software and select the
printer name set when installing.
The standard printer name is "Panaboard-UB8 USB Printer (A4/Letter *)".
* A4 or Letter changes with the models.
Note
• The Multi-Copy/Error Indicator flashes when printing.
After printing, all the panel keys are disabled until the Multi-Copy/Error Indicator lights.
• You cannot stop printing after printing starts. Do not attempt to stop printing.
• Do not turn off the power of the electronic board or unplug the USB cable before printing finishes. It may cause
the computer operation to become unstable.
• A maximum 9 copies are available.
• The output port can hold up to 10 sheets of copied paper. (Note that exceeding the output port's capacity may
result in paper jams.)
• The Contrast Key is not effective for adjusting the contrast of print.
• When printing almost black pages continuously uniform color density and light line streaks may appear. In such
a case, try again after waiting a while.
• When the unit falls in abnormal condition during printing, printing jobs (jobs in the spooler) may be lost. In such
a case, print again.
74
Name
This button causes the screen to be copied.
The status box displays the status of the TWAIN driver and the
electronic board.
Stand by:
Rotating:
Copying:
Scanning: The electronic board is now scanning the images on the
Converting: Indicates that the image data is being converted so that the
Busy:
Error:
Click to display information about the TWAIN driver.
Click to close the Panaboard Operation Panel.
Description
The electronic board is stand by.
Both of the Panaboard Operation Panel and the electronic
board control panel are operational.
The electronic board is rotating the screen.
The electronic board is copying the screen.
screen.
computer will be able to display the scanned data.
The electronic board is processing jobs.
An error has occurred with the electronic board.