Safety Precautions - Castex PX-1100LP Operator And Parts Manual

OPERATION

SAFETY PRECAUTIONS

This machine is intended for commercial use. It is
designed to clean carpet and upholstery in a indoor
environment and is not constructed for any other use.
Use only recommended cleaning solutions and
accessory tools.
All operators must read, understand and practice the
following safety precautions.
The following safety alert symbols are used throughout
this manual as indicated in their description:
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially dangerous
conditions to the operator or equipment.
FOR SAFETY:
1. Do not operate machine:
– Unless trained and authorized.
– Unless operator manual is read and
understood.
– In flammable or explosive areas.
– With damaged cord or plug.
If not in proper operating condition.
–
Unless cord is properly grounded.
–
– In outdoor areas.
– In standing water.
– With the used of an extension cord.
2. Before operating machine:
– Make sure all safety devices are in place
and operate properly.
3. When using machine:
– Do not run machine over cord.
– Do not pull machine by plug or cord.
– Do not pull cord around sharp edges or
corners.
– Do not unplug by pulling on cord.
– Do not stretch cord.
– Do not handle plugs with wet hands.
– Keep cord away from heated surfaces.
– Report machine damage or faulty operation
immediately.
Following mixing and handling instructions
–
on chemical containers.
PX-1100LP (07-00)
Home
4. Before leaving or servicing machine:
5. When servicing machine:
electrocution can result. Always unplug machine
before servicing.
an explosion or fire. Do not use flammable
materials in tank(s).
metals can cause an explosion or fire. Do not pick
up.
GROUNDING INSTRUCTIONS
Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electrical shock. This machine is
equipped with a cord having an equipment-
grounding connector and grounding plug. The
plug must be plugged into an appropriate outlet
that is properly installed in accordance with all
local codes and ordinances. Do not remove
ground pin; if missing, replace plug before use.
Find... Go To..
Turn off machine.
–
Unplug cord from wall outlet.
–
Unplug cord from wall outlet.
–
Avoid moving parts. Do not wear loose
–
jackets, shirts, or sleeves.
– Use manufacturer supplied or approved
replacement parts.
WARNING: Hazardous Voltage. Shock or
WARNING: Flammable materials can cause
WARNING: Flammable materials or reactive
GROUNDED OUTLET
(3 HOLE)
GROUNDING
PIN
3