Dynamic Ip Address (Dhcp) - D-Link DIR-610N User Manual

Section 3 - Configuration
My Internet Select Dynamic IP (DHCP) to obtain IP address information
Connection is: automatically from your ISP. Select this option if your ISP did not
provide you with any IP numbers to use. This option is commonly
used for cable modem services.
Host Name: The host name is optional but may be required by some ISPs.
Primary DNS Enter the primary DNS server address provided to you by your ISP.
Server:
Secondary Enter the secondary DNS server address provided to you by your
DNS Server: ISP. This is optional, but may provide more stability should the
primary DNS server fail.
MTU: Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP. 1500 is the default
MTU.
MAC Address: The default MAC address is set to the Internet port's physical
interface MAC address on the router. It is not recommended that
you change the default MAC address unless required by your ISP.
You can use the Clone Your PC's MAC Address button to replace
the Internet port's MAC address with the MAC address of your
Ethernet card.
Click Save Settings to save the current configuration, or click
Don't Save Settings to discard any changes that have been made.
D-Link DIR-610N User Manual

Dynamic IP Address (DHCP)

15