Advertisement
Assembly & Placement
Manual
Assembly
STEP 1
Attaching of bottom panel, side panels and casters
1. Securely insert the casters
( 4) into the bottom panel.
2. Align the dowels of the side panels (left and right) with the dowel holes in the bottom panel and
insert.
Side panel (Left)
Bottom panel
Dowels
Dowel holes
Front
Casters
STEP 2
Attaching of top crosspiece and rear cord cover
1. Align the support pole (right)
with the notch
on the right side of the top crosspiece, and
securely fasten with the support pole fastening
screws
( 2) using a Phillips head (+)
screwdriver. Fasten the support pole (left) to
the left side in the same manner.
2. Insert the rear cord cover fastening screws
(black screws)
( 3) into the screw holes on
the back of the top crosspiece and partially
fasten. Slide the 3 notches in the rear cord
cover behind the screws and securely fasten
the screws.
3. Align the dowels of the side panels (left and
right) with the dowel holes in the top crosspiece
and insert. Securely fasten with assembly
screws
( 4).
TY-S42PX20U
TY-S50PX20U
Model No.
Side panel (Right)
Dowels
Dowel holes
Support pole
fastening screws
Support pole (Right)
Top crosspiece
Notches
Rear cord cover
Notches
Rear cord cover fastening
screws (Black screws)
Assembly
screws
Side panel
(Left)
Side panel
(Right)
STEP 3
Attaching of glass shelf and cord holder
1. Align the dowels in the glass shelf supports (left)
with the dowel holes in the side panel (left) and insert.
Securely fasten with the glass shelf support fastening
screws (black screws)
( 1).
2. Attach the glass shelf supports (right)
manner.
3. Insert a cord holder in parallel with the glass shelf supports
(left and right), and align the dowels of the cord holder
with the dowel holes in the glass shelf supports. Attach
the other cord holder to the other glass shelf supports in
the same manner.
4. Attach the caution label to one
glass shelf on the right side,
facing the front. Insert the glass
shelf in parallel with the grooves
in the glass shelf supports (left
and right), and securely fasten
to the bottom of the (left and
right) glass shelf supports using
the glass shelf fastening screws
( 4). Fit the other glass shelf
in the same manner.
The tools required:
Plus (Phillips) (+) screwdriver
Do not use electric powered screwdrivers.
( 2)
Side panel
Dowel holes
(Left)
Glass shelf
in the same
supports (Left)
Glass shelf support fastening
screws (Black screws)
Glass shelf supports
(left and right)
Dowel / hole
Cord holder
Glass shelf
Caution label
Glass shelf
fastening screws
Position the glass shelf such that the caution
label is on the top surface, on the near side.
Do not load either glass shelf with equipment
weighing over 12 kg (26 Ib.). Do not load the
bottom storage area with equipment weighing
over 20 kg (44 Ib.).
TQZH507
Printed in Japan
Advertisement
