Babymore Peanut User Manual

Babymore Peanut User Manual

Group 0+ rear facing car seat

Advertisement

Quick Links

Notice
1. Only for use with Babymore Peanut Isofix Base.
2.This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to ECE
Regulation No.44,04 series of amendments for Semi-universal use in
vehicles fitted with ISOFIX anchorages systems.
3. It fit vehicles with positions approved as ISOFIX positions(as
detailed in the vehicle band book), depending on the category of the
child seat and of the fixture.
4. The mass group and the ISOFIX size class for which this device is
intended is:0-13KG and D.
This child restraint is classified for (Semi-universal) use and is suitable
for fixing into the seat positions of the following cars:
CAR
FRONT
CARLIST
Outer
No
Seat positions in other cars may also be suitable to accept this child
restraint. If in doubt, consult either the child restraint manufacturer
or the retailer.
Thank you for purchasing Babymore, If you need assistance.
Call: +442034755588 or email: customerservices@babymore.co.uk
Babymore, Unit C2 Zenith Industry Estate, Paycocke Road, Basildon,
Essex, UK, SS14 3DW
REAR
Outer
Centre
Yes
No
Peanut Isofix Base
Peanut Group 0+ Rear Facing Car Seat
USER MANUAL
Approved under ECER44/04
GROUP 0+ Suitable for newborn to 13kg
P44/V1/19 Babymore

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Peanut and is the answer not in the manual?

Questions and answers

Summary of Contents for Babymore Peanut

  • Page 1 Peanut Isofix Base Peanut Group 0+ Rear Facing Car Seat Notice 1. Only for use with Babymore Peanut Isofix Base. USER MANUAL 2.This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to ECE Regulation No.44,04 series of amendments for Semi-universal use in vehicles fitted with ISOFIX anchorages systems.
  • Page 2: Table Of Contents

    WARNING Contents The following brief instructions are intended to provide only an overview. In order to achieve maximum security and comfort for your child it is absolutely imperative that you read the whole instruction 1.Applicability................3 manual carefully. 2.Safety instructions..............4 3.Parts and interior equipment..........5 1.
  • Page 3: Safety Instructions

    2. Safety instructions ● Do not continue to use the child car seat if parts have become damaged or been loosened; In order to achieve maximum security and comfort for your child, ● The handle of the baby car seat must to be against the back of the please read the whole instruction manual carefully, to avoid any misuse vehicle seat;...
  • Page 4: Isofix Installation Instructions

    4. ISOFIX Base Installation instructions Diagonal belt guide Step 1.Please fully open ISOFIX support legs outward. (Fig.1) Step 2.Position the base on ISOFIX vehicle seat.(Fig.2) Shoulder belt slot Step 3.Hold the button first,then popping ISOFIX adaptor.Aim the ISOFIX connector to ISOFIX fixed groove of car.Then push connector to the fixed groove till “kaka”...
  • Page 5: Adjust The Carrying Handle

    5.Adjust the handle If the height of shoulder belts in child car seat is not fit for child, Adjust the height of the shoulder belts, please proceed as follows: ● The handle for the baby car seat can be adjusted into 4 positions. Step 1: loosen the shoulder harness ●...
  • Page 6: The Use Of Buckle

    7.Care and Maintenance ● The harness should be adjusted as tightly as possible without causing discomfort to your 7.1.Remove the fabric cover child. Step 1:First pull out the harness from the seat. ● It is dangerous not to tighten the straps. Check Step 2:Undo the press button on the handle, then remove the canopy the adjuster and ensure the straps are pulled from backwards.

Table of Contents