Advertisement
Quick Links
Notice
1. This is a "Universal" child restraint; it is approved to ECE Regulation
44.04 for general use in vehicles and will fit most, but not all,vehicle
seats.
2. A correct fit is likely if the vehicle manufacturer has declared in the
vehicle handbook that the vehicle is capable of accepting a
"Universal" child restraint for this group.
3. This child restraint has been declared "Universal" under more
stringent conditions than those applied to earlier designs which do
not carry this notice.
4. If in doubt, consult either the child restraint manufacturer or the
retailer.
Only suitable if the vehicle is fitted with -point static, 3-point
retractor safety belts, approved to UN/ECE Regulation No. 16 or other
equivalent standards.
WARNING
DO NOT place rear-facing child seat on front seats with activatced
airbags.
Thank you for purchasing Babymore, If you need assistance.
Call: +442034755588 or email: customerservices@babymore.co.uk
www.babymore.co.uk
Peanut Group 0+ Rear Facing Car Seat
USER MANUAL
Approved under ECER44/04
GROUP 0+ Suitable for newborn to 13kg
P44/V1/19 Babymore
Advertisement
Related Manuals for Babymore Peanut
Summary of Contents for Babymore Peanut
- Page 1 WARNING DO NOT place rear-facing child seat on front seats with activatced airbags. Approved under ECER44/04 GROUP 0+ Suitable for newborn to 13kg Thank you for purchasing Babymore, If you need assistance. Call: +442034755588 or email: customerservices@babymore.co.uk www.babymore.co.uk P44/V1/19 Babymore...
-
Page 2: Table Of Contents
Contents NOTES The following brief instructions are in ended to provide only an overview. In order to achieve maximum security and comfort for your 1.Applicability................3 child it is absolutely imperative that you read the whole instruction manual carefully. 2.Safety instruction ..............4 3.Parts and interior equipment..........5 1. -
Page 3: Safety Instruction
2. Safety instruction ● Do not continue to use the child car seat if parts have become damaged or been loosened; In order to achieve maximum security and comfort for your child, ● The handle of the baby car seat must to be against the back of the please read the whole instruction manual carefully, to avoid any misuse vehicle seat;... -
Page 4: General Use
4.General Use 5.Installation in ca ● Please read the instruction manuals in order to protect all passengers 4.1.Adjusting the carrying handl ● Do not put this infant car seat on a seat with activated front airbag ● You can lock the carrying handle into 4 ●... -
Page 5: Correct Securing Your Baby
● Attention:The handle of the seat must be firmly installed agains If the height of your shoulder belts in infant car seat is not fit for the backrest of car seat. your child, adjust the height of the shoulder belts, please proceed as follows: ●... -
Page 6: The Use Of Buckle
7.Care and Maintenance ● The harness should be adjusted as tightly as possible without causing discomfort to your 7.1.Remove the fabric cover child. Step 1:First pull out the harness from the seat. ● It is dangerous not to tighten the straps. Check Step 2:Undo the press button on the handle, then remove the canopy the adjuster and be sure that the straps are from backwards.