Optional Accessories; Installation Accessories - PROLUMIA PRO-BAY III Operating Instruction

OPTIONAL ACCESSORIES

Art.no. Description
40643410 Mounting bracket
40643411 Aluminum cover
40643412 Polycarbonate cover
40643413 85° lens
40643414 55° lens
40643415 MW motion sensor + Photocel
40643416 Remote control, for MW motion sensor (40643415)
40643417 Zigbee module (Tuya)
40643418 Bluetooth (BLE) module (Tuya)
40643420 Zigbee smart gateway

INSTALLATION ACCESSORIES

Polycarbonate / Aluminium cover installation:
1. Match 3 screw holes between the cover and the fixture
2. Unscrew 3 screws of the fixture in the right place
3. Put the cover onto the fixture and make sure all screw holes
match again
4. Fix the cover with supplied screws
Polycarbonate / Aluminium cover
Lens options and replacement:
1. Unscrew all screws and remove the existing lens
2. Place the new lens and make sure all screw holes match
3. Fix the new lens with the existing screws
Clear polycarbonate lens: 110° / 85° / 55°
8
The fixture can be controlled as follows:
1. On / Off
2. 0-10V (through connection wire)
3. Extension module (motion detection, Bluetooth and Zigbee)
Sensor installation:
1. Match triangle logos together on sensor and lens
2. Press it down and turn to the second triangle
with clockwise rotation
www.prolumia.com