IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
SLIDE RAIL 1. Hold the slide rail ( with the fixing bracket) against the wall at the desired height. 2. Mark the drill hole position through the fixing brackets. Then drill the hole. 3. Insert the screws anchors into the hole. 4.
Page 6
Washbasin Mixer Installation Method: Before installation, clean out dirt or other impurities, which may collect in water pipes by allowing water to flow freely for a moment. 1. Mounting stud into the mixer body base, and then tighten it. COLD 2.
Page 7
Instruction Handle Operation: Open Cold Open Close Cold Open Cold Close Close Open Close Turn lever around to adjust Le ft ha nd le for ho t wat er, righ t Lift the handle gently for open. wa ter temp erature. ha nd le for co ld wat er.
Page 9
Bath Mixer Installation Method: Before installation, clean out dirt or other impurities, which may collect in water pipes by allowing water to flow freely for a moment. 1. Install the two offset connectors into the hot and cold supply pipes. 2.
Page 10
Instruction Handle Operation: Open Cold Open Close Cold Open Cold Close Close Open Close Turn lever around to adjust Le ft ha nd le for ho t wat er, righ t Lift the handle gently for open. wa ter temp erature. ha nd le for co ld wat er.