Page 2
IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Page 3
Feed the assembly through the hole In Install the threaded rods and hand- the kitchen sink/countertop. Tighten the flexi-pipes into the bottom of the mixer body. Slide the rubber 'C' washer followed by Flush the pipework, then connect the the metal 'C' washer and tighten the flexi-pipes to the isolation valves, Turn back nuts With a spanner to secure the on the water, run the tap and check for...
Page 4
AQUAECO WASHROOM AND PLUMBING SOLUTIONS www.sanipexgroup.com INE-TRE-361-CP-04-23...