Bajaj Discover 100M Service Station Manual page 92

IMPORTANCE OF PM SCHEDULE EXECUTION
ni[ T (sÃD Di^ e v c[ n n[ vihnmi> Y ) kiQ)n[ l& b )\ k [ S n krvin) p¹wt)
SOP for Non Sealed Drive Chain Lubrication by removing from Vehicle
Chain
Hanging
Stand
Discover 100 M
Service Station Manual
• Blow the low pressure compressed air on drive chain
Di^ e v c[ n upr li[ p[ \ S r viL) ki[ À p[ \ A D hvi miri[
1. Clean NON SEALED drive chain by diesel / Kerosene nylon brush.
For details, please refer SOP given in Service Circular SER/GEN/17
dated 25.03.2014 or Preventive Maintenance Encyclopedia page No. 166
to 174
2. Put the NON SEALED drive chain in molten grease with the help of
Hook
hook & keep it for 2 minutes in completely dipped condition.
Caution :
Never lubricate SEALED drive chain in greasing unit, as this will
damage the drive chain.
3. After 2 minutes, take out the drive chain with the help of hook & hang it
on chain hanging stand to allow dripping off excess grease.
4. Rotate the roller using hand to allow the chain to slide on roller for
proper dripping off excess grease & uniform lubrication.
Grease collected in tray can be reused.
Keep the chain hanging on the stand for 3 minutes to allow the molten
grease to solidify.
5. Remove chain from the stand & refit on vehicle
{SOP)
65
Dealer Development Center
Akurdi Pune