Related Manuals for Trio UNIPLAY HMI
Summary of Contents for Trio UNIPLAY HMI
- Page 1 T E C H N O L O G Y ETHERNET, COM, USB 7” & 10” DISPLAY LED INDICATORS QUICK START GUIDE uniplay hmi ETHERNET, COM, USB P843 | P844 10” DISPLAY LED INDICATORS...
-
Page 2: Safety Warning
Safety Warning During the installation or use of control systems, users of Trio products must ensure that there is no possibility of injury to any person or damage to machinery. Control systems, especially during installation, can malfunction or behave unexpectedly. Bearing this in mind, users must ensure that even in the event of a malfunction or unexpected behaviour, the safety of an operator or programmer is never compromised. -
Page 3: Installation
Uniplay HMI is a whole new way of creating and storing HMI screens. HMI screens can be created and linked to programs directly inside Motion Perfect. The HMI screens are stored with and loaded with the machine project on the Motion Coordinator. - Page 4 4. Whilst attempting to connect to the Motion Coordinator the panel displays a page: if no Hmi page exists, the UNIPLAY panel will display”invalid Hmi page”.
- Page 5 Creating an Hmi page Right mouse click on “Programs” or use Program->New on the menu...
- Page 6 Select HMI Page under “Add New Program”, and give the page The properties of each component can be edited by a menu a name: brought up using a right mouse click: The new blank page will open in the editor: linking prOpertieS tO COntrOller data The components on the left hand column can be dragged and The properties of each component can be fixed or linked to...
- Page 7 The menu then lets you choose what type of controller data To see the screen run live on the Uniplay HMI simply click the to link to. This can be a program variable, for example in green “upload” button: the program “MAINPROG” below, or VR, or other controller data types.
-
Page 8: Installation Environment
These fonts should also be selected in Motion Perfect so that condensation in the device. they can be correctly rendered on both the Uniplay HMI and • Do not install Uniplay in environments where have the PC. If other fonts are selected they may render in the inflammable gases. -
Page 9: Power Connections
making a nema-4 mOUnting panel accomplished by a switching power supply. The peak starting current can be as high as 2A. The unit can be mounted into panels with a depth of 105mm. It is recommended that the unit be mounted on the front panel of a steel enclosure, through an appropriate opening. -
Page 10: Grounding Requirements
COnneCtiOn COmmUniCatiOn COnneCtiOnS To make a connection, strip about The communication ports are located on the underside of the 10mm of insulation off the end of Uniplay. COM1, COM2, USB host. the wire, turn the connector screw counterclockwise until the gap is etHernet: wide open, insert the wire all the way in, and turn the screw clockwise... - Page 11 dimenSiOnS and pOrtS DIP switch & reset button Com1 RS232 Fuse Ethernet port Power connector USB Host port Com1 RS485, Com3 RS485 Uniplay 7 R2mm CUTOUT DIMENSIONS 192mm 146.35mm 34mm 200.35mm...
- Page 12 M O T I O N S P E C I A L I S T CAD data Drawings to aid packaging and mounting are available in various formats from the Trio web site. Products should be wired by qualified persons.