Water Connection - The Outdoor Plus SELF-CONTAINED UNIT Installation & Operation Instructions

SITE PREPARATION |
Connecting the water system on the Fire & Water Fountain is an important step in the installation process. The
fountain uses a water supply line to provide water to the fountain and it's components. It is important to ensure
that the water supply line is properly installed and connected to a shut-off valve that can be easily accessed in case
of an emergency. We recommend that you keep a copy of the checklist on hand throughout the installation process
as a quick refrence.
Use this checklist to ensure that the water system on your fire & water fountain is properly connected:
Check that the water supply line is properly sized and installed.
Ensure that the water supply line is connected to a shut-off valve that can be easily accessed in case of
emergency.
Locate the water inlet on the fountain's base.
Connect the water supply line to the fountain's water pump using a hose connector.
Turn on the water supply and check for any leaks or issues with water flow.
Adjust the water pressure to the recommended level for the fountain.
Regularly inspect the water supply line and connections for signs of wear or damage.
Clean the water supply line and check the shut-off valve periodically.
Inspect the water inlet for any clogs or blockages that could impact performance.

Water Connection

WATER CONNECTION:
9