OPERATION - FRESH START
11
5) Open the thermal barrier and if the
Record LED is still flashing this means the
M.O.L.E. ® Thermal Profiler is still record-
ing and it must be stopped by pressing the
Record button.
If a thermocouple sensor is removed
before the M.O.L.E. ® Thermal Profiler has
stopped recording data, the data for that
channel will show as OPEN T/C.
6) Remove the M.O.L.E. ® Thermal Profiler
from the thermal barrier. Handle it carefully,
as the case may still be warm.
7) Disconnect the thermocouple sensors
from the M.O.L.E. ® Thermal Profiler.