ECD V-M.O.L.E. Solar Quick Reference Manual page 10

OPERATION - FRESH START
9
Step 2: Perform Data Run
1) Place the M.O.L.E. ® Thermal Profiler in
the thermal barrier.
Never permit the M.O.L.E. ® Thermal
Profiler to exceed the absolute maximum
warranteed
permanent damage may result. The
thermal barrier supplied with the system is
specifically
M.O.L.E. ® through typical solar metalliza-
tion processes.
2) After the oven stabilizes:
• Press the ON/OFF button.
• Press the Record button.
• Close the thermal barrier making sure it
is fully latched and the thermocouple
sensor wires are not damaged.
internal temperature,
designed to protect
as
the