Advertisement
Mounting the timer
1. Select the location for the timer and use the three holes provided for
mounting.
2. Remove module from timer box. Hold the timer box in place and mark the
holes on the mounting surface.
3. If mounting to drywall:
a. Drill a 3/16" size hole for the drywall anchors at the marked locations
b. Insert an anchor in each hole gently tap the open end of anchor with a
hammer until the anchor is almost flush with the wall.
c. Mount the timer to the anchors using the supplied screws.
4. If mounting to plywood drill a 3/32" size hole for each screw and mount the
timer to the surface using the supplied screws.
Mounting holes
Advertisement
