Advertisement
RS-200 Configuration
Direct Connect:
1.
Connect the provided power adapter into the DC in
2.
Connect Ethernet cable to the computer and to LAN port
3.
Connect a HDMI cable to HDMI port
connect a DisplayPort cable to Display port
4.
Configure your computer system's network settings to:
a. IP address (TCP/IPv4): 192.168.100.2
b. Subnet mask: 255.255.255.0
5.
Open your browser (Google Chrome is recommended) and connect to the RS-200:
c. Default URL:
d. Default login: admin
e. Default password: admin
RapidSignage - Rapid Digital Signage Deployments
www.rapidsignage.com
(5)
to an Videowall. (if two monitors are used, then
http://192.168.100.1
(4).
(7).
(6)
and second monitor)
Advertisement
