Page 1
RS-200 Quick Installation Guide Power Button COM Port USB 3.0 (x2) DC in HDMI Output Display Port LAN Port Package content: - Power Adapter - Power Cord RapidSignage - Rapid Digital Signage Deployments www.rapidsignage.com...
Page 2
Configure your computer system’s network settings to: a. IP address (TCP/IPv4): 192.168.100.2 b. Subnet mask: 255.255.255.0 Open your browser (Google Chrome is recommended) and connect to the RS-200: c. Default URL: http://192.168.100.1 d. Default login: admin e. Default password: admin RapidSignage - Rapid Digital Signage Deployments www.rapidsignage.com...
Page 3
With DHCP networking: If you want the RS-200 connect to a DHCP network, you need to directly connect with RS-200 first and change the networking setting of the RS-200: Click SystemConfig on the main page of RS-200, then click Network config Tab.