Grounding Instructions; How To Move The Chair - Panasonic EP-1017 Operating Instructions Manual

GROUNDING INSTRUCTIONS

• This product must be grounded. If it should malfunction, grounding provides the path of least
resistance for electric current to reduce the risk of electric shock.
• This product is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
DANGER
• Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product even if it does not fit the outlet. Have
a proper outlet installed by a qualified electrician.
• This product is for use on a nominal 120-volt
circuit and has a grounding plug that looks like
the plug shown in Figure A. Make sure that the
product is connected to an outlet having the
same configuration as the plug. No adaptor
should be used with this product.

HOW TO MOVE THE CHAIR

CAUTION
Do not move the chair while someone is sitting in it.
Failure to observe this point may cause the chair to tip over, possibly resulting in personal injury.
Use the casters to move the chair.
• Do not attempt to move the chair by lifting from the front (right illustration). The correct way to
move the chair is by putting your foot on the caster and pushing down from behind the chair (left
illustration).
• It is easier to move the chair if the massage heads have been moved to their resting positions
and the backrest reclined.
• Moving the chair may damage easily marked floor surfaces; therefore, place a mat or cloth on the
floor and move the chair slowly.
• Before pushing down the chair, prepare yourself for its weight and exercise caution when moving
it.
6
Caster
CORRECT
Figure A
GROUNDING
PIN
GROUNDED
OUTLET
WRONG