Table of Contents
Advertisement
Studio Panel LED Luminaires
Stud Adapter Installation
Installing an optional Stand Stud Adapter is quick and easy. Simply rotate the Handle / Mount Assembly to access the
mounting hole in Handle / Mount Assembly. As shown in Figure 10, insert retaining bolt into hole and thread into
Stud Adapter.
5. Barndoor Installation
The Studio Panel LED Luminaire can accept up to four snap-on barndoor leaves (sold separately in sets of two). The
barndoor assembly is easily installed or removed as desired as shown in Figure 11.
• To install a barndoor assembly, remove Handle / Mount Assembly, pull back on quick release knob, and snap barn-
door leaf onto side of Studio Panel LED Luminaire. Reinstall Handle / Mount Assembly.
• To remove a barndoor leaf, pull back on quick release knob and pull leaf away from Studio Panel LED Luminaire.
NOTE:
Handle / Mount Assembly
must be removed before
barndoor assembly
installation or removal.
Snap-On
Barndoor Assembly *
* Two sets of PLSTUPNLBD 2-Leaf
Snap On Barndoor shown.
Handle / Mount
Assembly
Handle / Mount
Assembly
Mounting Hole (M12 or 1/2 in.)
Note: *M12 Bolt and washer supplied with stand stud adapter.
Figure 10: Stand Stud Adapter
Figure 11: Snap-On Barndoor Assembly
M12 Mounting
Bolt*
Studio Panel
LED Luminaire
Barndoor Quick Release Knob
Installation & User's Manual
Washer*
Stand Stud
Adapter
11
Barndoor Installation
Advertisement
Table of Contents
