Page 1
Coreline XL BVP140 BGP221/231 0,25m At 0º 0,04m At 15º 0,1m At 90º 0,26m Inrush Current (230VAC) (Apk/ms) 53/300 Luminaire Surge Protection 6KV DM/ 8KV CM Luminaire Surge Protection with SPD Optional 10KV Maximum number of luminaires to install Type of electrical protection installation...
Page 3
WARNING This luminaire must be installed by qualified personnel only Disconnect before servicing Use gloves to install/service the luminaire The space between U-shape bracket and luminaire could be a pinch point Keep hands clear during operation. Always follow this mounting instructions to fix the luminaire Never modify the luminaire nor the fixation locations for installation Risk of accident due to incorrect tightening torque...
Page 5
LUMINAIRE FIXATION For B-type installation>3m, Two screws One screw additional 2 fixation device is mandatory Not allowed for comunication box version. Do not forget to screw the bolt with the torque indicated 5/24...
Page 6
Never include more screws than indicated in this mounting instruction If steel cable is used as 2 fixation device: - Minimum section have to be of 3 mm - Maximum allowed length of 500 mm - Minimum M5 stainless steel or M5 Xylan in SPO (no stainless steel!).
Page 7
COMUNICATION BOX INSTALLATION / FIXATION THE MANIPULATION OF THIS TAG INVOLVES THE LOSS OF THE WARRANTY OF THE PRODUCT 7/24...
TYPES OF CONNECTION PSU, PSA (D13), PSDD (D18), PSM (D28) CONNECTION Mains connection Class-I Mains connection Class-II Ø7-14 mm (wire section 1 - 2,5 mm Ø6-9 mm (wire section 1 - 2,5 mm LINE LINE (Brown) (Brown) GROUND (Yellow & Green) NEUTRAL NEUTRAL...
Page 9
TECHNO CONNECTOR PSU WITH 3 POLES CONNECTOR PSD (DALI) WITH 5 POLES CONNECTOR POWER OFF POWER ON COLOSIO CONNECTOR POWER OFF POWER ON 9/24...
Page 10
GLASS MAINTENANCE INSTRUCTION POWER OFF POWER ON - If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. - The maintenance of the luminaire can´t be done on the pole.
Page 14
Have you already downloaded the Philips Service tag app? It helps you make LED maintenance easier and faster! 1.Download the app App herunterladen Descargar la app Télécharger l’application Android 2.Place tag on the fuse box 3.Register the product Stelle den Tag auf den Sicherungskasten...
Page 15
Annex I: Simplified EU Declaration of Conformity Hereby, Signify Holding declares that the radio equipment type included into the luminary is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.philips.com/lighting 01/2019 Signify I.B.R.S.
Page 24
The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V..