2/2*
CARD SIZE
54 mm×85.6 mm
10×15cm
100 mm×150 mm
4˝×6˝
101.6 mm×152.4 mm
8˝×10˝
203.2 mm×254 mm
LETTER
216 mm×279.4 mm
*These items cannot be displayed when the
printer does not support the paper sizes.
[PAGE LAYOUT]
•
(Possible layouts on the camera)
F
Settings on the printer are
prioritized
G
1 page with no frame print
H
1 page with frame print.
I
2 pages print
J 4 pages print
An item cannot be selected if the printer
•
does not support the page layout.
n Layout printing
When printing a picture several times
•
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [ J ] and then set the
number of prints to 4 for the picture on
[NUM. OF PRINTS].
When printing different pictures on 1
•
sheet of paper
For example, if you want to print 4
different pictures on 1 sheet of paper,
set [PAGE LAYOUT] to 4-picture printing
[ J ] and then set [NUM. OF PRINTS]
for the pictures to 1 in [MULTI SELECT]
(P34).
LSQT1098
Connecting to other equipment
Do not disconnect the USB connection
•
cable when the cable disconnection
warning icon [ K ] is indicated. (Depending
on the printer, the icon may not be
displayed.)
The unit is receiving an error message
•
from the printer when the [*] indication
lights orange during printing. After
finishing printing, make sure there are no
problems with the printer.
If the total number of ordered prints or the
•
number of pictures set for print is large,
printing is performed at intervals. In such
cases, the number of remaining prints
shown on the display will differ from the
number of prints you set. The discrepancy,
however, does not indicate an error.
Date print, paper size and page layout
•
settings on the printer may have priority
over the same settings on the unit. Check
these settings on the printer as well.
If printing did not work, try turning off the
•
printer and start the procedure again
from the beginning. (P33)