Advertisement
Quick Links
Advertisement
Related Manuals for pico Technology TA061
Summary of Contents for pico Technology TA061
- Page 2 (including damages for loss of profits, loss of business, loss of use or data, interruption of business and the like), even if Pico Technology Ltd. has been advised of the possibility of such damages arising from any defect or error in this manual or product.
- Page 3 IEC safety symbols The following symbols may appear on the product or in this instruction manual: Caution, risk of danger. Refer to manual. Caution, risk of electric shock. Earth (ground) terminal. DO150-1 © Copyright 2008 Pico Technology Ltd. All rights reserved.
- Page 4 Refer to qualified service personnel. Indoor use only. Do not operate in wet or damp environments. Keep product surfaces dry and clean. Do not operate the product in an explosive atmosphere. © Copyright 2008 Pico Technology Ltd. All rights reserved. DO150-1...
- Page 5 The innovative IC contact system of the TA061 probe, with 5 different IC adapters from 0.5 to 1.27 mm pitch in combination with the ground blade and IC ground copper pad, is the ideal solution for short-circuit-safe, reproducible and accurate measurements.
-
Page 6: Specifications
1000 10000 Frequency [MHz] (1) Connect to oscilloscope with a input impedance of 50 Ω ± 1 %. © Copyright 2008 Pico Technology Ltd. All rights reserved. DO150-1... - Page 7 0° C to +50 °C non-operating -40° C to +71 °C Maximum relative humidity operating 80 % relative humidity for temperatures up to +31 °C, decreasing linearly to 40 % at +50 °C DO150-1 © Copyright 2008 Pico Technology Ltd. All rights reserved.
-
Page 8: Probe Accessories
TA061 User's Guide Probe Accessories You can buy a range of kits containing accessories and spare parts for the TA061 probe. Contents of the available kits are listed below. Item TA064 TA065 TA066 TA067 TA068 spring advanced basic standard solid... - Page 9 CuBe 0.5 mm Self-adhesive Cu Pads ( 2 x 2 cm ) Ground Blade 2.5 DEVICE UNDER TEST Sprung Hook 2.5 - 50 ohm black BNC Adapter 2.5 PCB Adapter Kit 2.5 DO150-1 © Copyright 2008 Pico Technology Ltd. All rights reserved.
-
Page 10: Scope Of Delivery
The BNC Adapter is rated: 42 V pk AC + DC The accessories provided with the probe have been safety tested. Do not use any other accessories than those originally provided. © Copyright 2008 Pico Technology Ltd. All rights reserved. DO150-1... - Page 11 Do not grip the white plastic insulator or the Use pliers to grip and pull the probe carefully out probe housing with pliers. of its contact socket. DO150-1 © Copyright 2008 Pico Technology Ltd. All rights reserved.
- Page 12 DO150-1...
Need help?
Do you have a question about the TA061 and is the answer not in the manual?
Questions and answers