Editing The Effects; Editing The Connection Order For Effects - Boss Gigcaster 5 Reference Manual

Editing the Effects

For channel 1 through INSTRUMENT channel, you can edit "effect patches", and for the channels from USB through BLUETOOTH, you can
edit the dedicated effects for each channel.
1 .
Touch <EFFECTS>.
2 .
For channel 1 through INSTRUMENT channel: set
"PATCH" to the effect patch you want to edit.
* If the effect category is "CONSOLE", this edits the CONSOLE effect.
3 .
Touch < >.
This shows the edit screen for the effect patch, or the EFFECT
EDIT screen.
4 .
Touch the icon of the effect you want to edit.
The effect toggles on/off each time you touch the icon.
On Off
* Use "SW" to toggle the effects on/off.
The parameters of the selected effect are shown.
5 .
Edit the parameter's value.
6 .
To save the effect patch you edited, follow the steps
to write the patch.
* When using the CONSOLE effect or the dedicated effects for the
channels from USB to BLUETOOTH, you don't need to write the
data. That's because the settings you edit are saved as-is.
On the home screen, touch an icon corresponding to channels 1
through SOUND PAD to open the window.
Touch < > to display the effect edit screen.

Editing the Connection Order for Effects

When editing an effect patch belonging to the "GUITAR"
effect category, you can edit the order in which the effects are
connected.
1 .
Touch the icon of the effect whose position you
want to change, and drag it into the desired place in
the effect chain.
This example shows how to place the X-OD effect between
PDL and FX1.
2 .
When the "+" icon appears, release the finger you're
using to drag the icon.
This places X-OD between PDL and FX1.
Configuring the Channels
17