Table of Contents
Advertisement
Selecting effect patches
4 .
Use the PATCH control to select the effect patch you
want to use.
Patch
Explanation
These cannot be overwritten.
PRESET
However, you can edit a preset patch and save it
as a user patch.
USER
These can be overwritten.
5 .
Adjusts the effect parameters.
* For details on the parameters, refer to "Parameter Guide" (Roland
website).
GENERAL
1 .
Touch <GENERAL>.
2 .
Set the parameters.
Parameter
Explanation
Sets whether to input USB audio signals as
USB AUX IN
auxiliary input (AUX IN) for INSTRUMENT channel
(ON) or not (OFF).
Configures the input position for the USB audio
INSERT
signal.
Configures the input level for the USB audio
LEVEL
signal.
REVERB
Sets the level of the signal sent to reverb from
SEND
INSTRUMENT channel.
When this is set to "ON", ENHANCE/COMP/NS also
stay on, even when the EFFECTS button is OFF.
DYNAMICS
When DYNAMICS REMAIN is enabled
REMAIN
When the EFFECTS button is OFF,
this lights up blue.
Configuring the Channels
11
Advertisement
Table of Contents
