Table of Contents
Advertisement
Basic Operation
Configuring the Channels
This shows you how to configure each channel, according to which devices you've connected.
The example below shows how to make the settings for the input gain, EQ and effects, assuming that you've connected a guitar to
channel 1.
MEMO
You can use the same operations to configure the other input channels as well. For details, refer to the "Reference Manual" (Roland website).
What to do
1.
Connect your guitar to the
front panel.
2.
Press the [
] button on the top panel.
The CHANNEL 1 screen appears.
Selecting an input source
3.
Touch <INPUT>.
4.
For the INPUT, touch <GTR>.
This sets the guitar as the input source for channel 1.
Setting the input gain
5.
Use the GAIN control to adjust the input gain.
6
(guitar) jack on the
Setting the EQ
6.
Touch <EQ>.
7.
With the EQ button enabled, adjust the tonal
character of each frequency band.
Setting the effects
8.
Touch <EFFECTS>.
9.
With the EFFECTS button enabled, use the PATCH
control to select the effect you want to use.
This unit comes with preset effect settings to match each input
source.
10.
Adjusts the effect parameters.
For details on the parameters for each input channel, refer to the
"Parameter Guide" (Roland website).
EQ: ON
EFFECTS: ON
Advertisement
Table of Contents
