Table of Contents
Advertisement
3.
Enter login information.
(4)
(1) Connect to
Do not enter this information if you selected a host in step 2.
If you selected [Manual Entry] in step 2, enter the IP address of the host that you
want to connect to.
(2) Name
Enter a user name. (Maximum length: 12 half-width characters/6 full-width
characters)
The name you enter will be displayed on the host (monitor).
(3) Connect automatically from now on
Select the check box to automatically connect to the same device next time the
application starts.
Selecting the check box allows you to automatically connect simply by tapping
[TDLink].
(4) Icon
Set an image that will be displayed on the host (monitor) when logging in.
To change the image, tap the icon and select a different image.
4.
When you have completed the settings, tap [Connect].
The main screen on the tablet device is displayed. (page 9)
TIPS
• When authentication via conference connection ID is set, a conference connection ID entry
screen appears. Enter the conference connection ID set under "Verify by connection ID" on
(1)
the host. (page 23)
• To disable automatic connection, perform the procedure after the device has automatically
(2)
connected.
(3)
(1) Tap [Open menu] and then [Exit Conference].
(2) Tap [Yes] and disconnect temporarily.
(3) Tap [Open menu] and then [Join Conference] and select the device for which you want
to disable automatic connection.
(4) Clear the "Connect automatically from now on" check box.
(5) Tap [Connect] to reconnect.
- 7 -
Advertisement
Table of Contents
