Unit Configuration
Network Configuration
The unit's network configuration is set on the Network tab of the Configuration page. Settings
pertaining to the unit's network connection are:
Figure 13: Network Configuration
•
DHCP: Allows the unit to request a dynamic IP address from a server on the network.
•
Static IP Address/Net Mask/Gateway: When not using a dynamic address, enter static
network configuration information here.
•
Telnet Service: Enable or disable the built-in Telnet server.
details.
•
HTTP Services: Enables/disables access via HTTP and HTTPS. Available options are: HTTP
and HTTPS, HTTP only, and HTTPS only.
completely.
•
HTTP/HTTPS Server Port: Changes the TCP port that each server listens on.
•
DNS Servers: Allows the unit to resolve host names for Email, NTP and SNMP servers as
well as cameras.
GM1093
It is not possible to disable the web interface
19
See Telnet (page 23) for
Revision Date: 10/15/2010